Площадка SM-PD22.
General Safety Information
- To avoid serious injuries:
- Be sure to attach reflectors to the bicycle when riding at night. Do not continue riding the bicycle if the reflectors are dirty or damaged, otherwise it becomes more difficult for oncoming vehicles to see you.
- If you have any questions concerning your pedals, contact a professional dealer.
- Read these Technical Service Instructions carefully, and keep them in a safe place for later reference.
NOTE: Parts are not guaranteed against natural wear or deterioration resulting from normal use.
A SI-PD22C
Technical Service Instructions
Note:
- This reflector (SM-PD22) is for use with the PD-M959/ PD-M540/PD-M520/PD-M515 pedals only.
- The reflector can be installed on either a left or right pedal.
1. Turn the adjustment bolt on the pedal to adjust the spring tension to the weakest setting.
2. Press the reflector tab firmly in at "A" on the pedal.
3. Use a blunt instrument to fit the tab on the other end of the reflector in at "B" on the pedal.
4. Turn the adjustment bolt on the pedal to adjust the spring tension to the strongest setting.
1. Turn the adjustment bolt on the pedal to adjust the spring tension to the weakest setting.
2. Use a blunt instrument to pry the reflector tab out from "B" in the pedal.
SHIMANO AMERICAN CORPORATION
Please note: Specifications are subject to change for improvement without notice. (English)
One Holland, Irvine, California 92618, U.S.A. Phone: +1-949-951-5003
SHIMANO EUROPE HOLDING B.V.
Industrieweg 24, 8071 CT Nunspeet, The Netherlands Phone: +31-341-272222 SHIMANO INC.
3-77 Oimatsu-cho, Sakai, Osaka 590-8577, Japan
© Feb. 2004 by Shimano Inc. PIT. IZM. Printed in Malaysia
